Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Colleyville
Gate motor and opener repair in Colleyville usually runs between $240 and $1,800 depending on whether we’re replacing a control board, a swing-arm motor, or the entire operator, and most calls are resolved in a single visit. We know Colleyville’s estate gates because we work on them every week: custom ornamental iron on half-acre lots, matched intercom entry, and operators that have to move a gate weighing several hundred pounds without grinding or faulting. If your gate is straining, stopping mid-cycle, or dead at the keypad, call (817) 572-8590 and we’ll send a technician with the parts loaded for Colleyville’s common brands.
Our Gate Motor & Opener team handles everything from a burned-out swing-arm motor on a custom wrought-iron gate to a complete slide operator replacement on an estate off Pool Road. We’re the company that writes the price down before work starts and hands you a photo record of what we found, what we set, and what we left behind.
Why Vance Gate Repair Bedford Is Colleyville’s Preferred Gate Motor & Opener Company
Colleyville homeowners call us because the diagnosis is already done right the first time. A gate that binds or runs slow on Blackland Prairie clay is almost never a motor problem alone, and we know that before we pull into the driveway. Adrian Vance started this company in 2014 doing commercial access-control documentation, and that habit carried into every residential gate we touch: written scope, written price, photographic evidence on every visit. You don’t get a verbal estimate and a handshake. You get paperwork.
Reviews from Colleyville customers repeatedly mention the same two things: the price didn’t change from the written quote, and the technician explained what the gate was actually doing, not just what part got swapped. We dispatch background-checked, uniformed technicians to every address in Colleyville, and a live person answers the phone 24 hours a day. Not a callback queue, not a voicemail loop. A person.
On a recent call near Glade Road, a homeowner had already replaced a LiftMaster motor once. The new one was binding too. We found the hinge post had heaved a quarter-inch out of vertical from clay swell, sapped the rack and pinion, and left the operator fighting the geometry. We realigned the post footing, remounted the motor, and photographed the new limit-switch positions before we left. That gate has cycled silent since.
Our Gate Motor & Opener Services in Colleyville
Motor Installation
A new operator on a Colleyville estate gate typically runs $1,200 to $3,400 installed, depending on the gate’s weight, leaf length, and whether you want battery backup or intercom integration included. Large custom wrought-iron gates off Bransford Road often call for a heavy-duty operator like a Viking or Elite model, not a residential kit from a big-box store. We size the operator to the actual gate weight and cycle frequency, then write the price before any parts are ordered.
Motor Repair
Most motor repairs in Colleyville are $240 to $680: a new capacitor, a limit switch reset, a replacement arm bracket, or a control board swap. On estate homes built between 1988 and 2005, we regularly replace swing-arm motors that have exceeded their duty cycle, particularly on gates that cycle ten or more times a day. The clay heave under Colleyville makes these failures happen sooner, because the operator works harder than it was designed to.
Linear Motor
Linear arm motors on pedestrian and mid-weight driveway gates in Colleyville run $420 to $1,100 for a replacement depending on stroke length and mounting hardware. The failure point is often the threaded drive rod: when the hinge post shifts seasonally, the arm binds and strips the threads. We check post alignment on every linear motor repair, because installing a new arm on a tilted post just guarantees a second failure.
Slide Motor
Slide gates on larger Colleyville lots, particularly those with long driveway runs off Cheek-Sparger Road, need operators rated for continuous duty. A slide motor replacement here typically runs $900 to $2,600 installed, and we verify the track level and end-stop placement before mounting the new unit. If the steel track has shifted on the clay, we shim and resecure it first, then mount the motor to a clean plane.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Colleyville
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we don’t steer you toward a replacement when the motor already on the property can be repaired. Most Colleyville estates run LiftMaster, Elite, or Viking operators on custom gates, and we stock the common control boards, arms, and capacitors for those brands on our service vehicles. That means a single visit fixes most failures instead of a diagnosis today and a part next week. If your gate has a DoorKing slide operator or a Mighty Mule on a secondary entry, we handle those too, with the same written price before work starts.
Common Gate Motor & Opener Problems We See in Colleyville Homes
- Clay heave binding swing-gate hinge posts. The Blackland Prairie soil under Colleyville shrinks in dry summers and swells after fall rains, shifting concrete post footings seasonally. The operator strains without throwing an obstruction fault, and the gate opens slow until the motor burns out. We find this pattern on gates along Glade Road and Pool Road every month.
- Storm-damaged photocells and bent gate leaves. Spring severe weather in Colleyville brings high winds and hail that knock safety photocells out of alignment, disabling auto-reverse or causing the gate to open on its own. We realign the beam, test the reversal circuit, and photograph the corrected setting.
- Control board failures on 15-25-year-old operators. Estate homes built from the late 1980s through the 2000s often still run their original operator. The control board fails mid-cycle, usually during holiday traffic when the gate cycles nonstop. Board replacement is a same-visit fix in most cases.
- Solar-powered gate openers underperforming on tree-lined Colleyville lots. Mature oaks and crape myrtles shade solar panels, particularly on north-facing gate posts near Pool Road. The battery drains overnight and the opener works in the afternoon only. We relocate the panel, size a larger battery, or run a conduit to line voltage where needed.
Pricing for Gate Motor & Opener in Colleyville, TX
Here’s what Colleyville homeowners should expect to pay in 2026. A motor repair with a new capacitor or limit switch reset runs $240 to $380. A swing-arm or linear motor replacement runs $420 to $1,100. A full operator replacement on a heavy ornamental gate runs $1,200 to $3,400 installed. Slide operator replacements on larger estates run $900 to $2,600. The variables are gate weight, leaf length, access to line voltage, and whether we’re also aligning a shifted post or integrating a keypad. Every quote is written and handed to you before any work begins, and the price does not change unless you approve an added scope in writing. Call (817) 572-8590 for a free estimate.
We Also Serve Cities Near Colleyville
Our Gate Motor & Opener in Colleyville service area covers the city and its surrounding neighborhoods, and we dispatch regularly to Bedford, Euless, Southlake, and Hurst. If you’re in a neighboring community with a gate that binds, faults, or won’t respond to the remote, the same written-price, photo-record standard applies. Call us and we’ll route a tech to you.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Colleyville
The most common cause on Colleyville’s estate lots is a hinge post that has heaved out of vertical from seasonal clay swell, binding the operator without tripping an obstruction fault. Your gate works, but slowly, and the motor is fighting the geometry every cycle. The fix is post realignment and bracket reset, not another motor. Call (817) 572-8590 and we’ll verify alignment before recommending any parts.
Yes. We integrate intercom, keypad, and camera entry systems into LiftMaster, Elite, and Viking operators on custom gates throughout Colleyville, including residential estates near Bransford Road and Glade Road. We document the wiring and leave you a photo record of every connection point, so any future technician can see exactly how the system is configured.
Every 12 months for a slide gate that cycles more than six times a day. The track, rollers, end stops, and motor brushes all wear, and clay movement under the track means Colleyville’s slide gates need alignment checks more often than gates on stable soil. A service visit runs $140 to $240 and usually prevents a $900-plus operator failure.
It means the solar panel is undercharging the battery, often because tree canopy shades the panel for part of the day or the panel is facing the wrong direction on a Colleyville lot with heavy oak cover. The battery drains overnight and builds enough charge by afternoon to operate. We test the panel output, relocate or re-angle it, and often upgrade the battery. Call (817) 572-8590 for a written diagnosis.
First, clear any debris from the gate path and check that the photocell beams are not blocked or knocked out of alignment by wind or hail. If the gate still opens on its own or stops mid-travel, the safety circuit or the limit switch has likely been affected. We respond to storm-related Colleyville calls and realign the beam, reset the limits, and test the auto-reverse under load before we leave.
For a gate motor or opener repair in Colleyville with a written price before any work starts, call Vance Gate Repair at (817) 572-8590. We’ll dispatch a background-checked technician with the parts loaded for your operator brand, complete the diagnosis, and hand you the quote in writing before we pick up a tool.
Written by Adrian Vance, Owner at Vance Gate Repair Bedford, serving Colleyville and the surrounding Dallas-Fort Worth metro since 2014.