Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Bedford
Gate repair in Bedford usually means one of three things: a wooden swing gate that’s dragging a trench in the yard, an automatic opener that quit responding, or a hinge post that’s heaved so far out of plumb the latch won’t catch. Most Bedford repair calls we handle are completed the same day, and every job starts with a written price before we touch a tool. If your gate is sagging, grinding, or dead in the driveway on Harwood Road or anywhere else in the 76021 or 76022, call (817) 572-8590 and a live person answers, any hour.
Why Vance Gate Repair Bedford Is Bedford’s Preferred Gate Repair Company
Bedford isn’t a new-construction market. The homes here were built mostly between the late 1960s and early 1990s, and the gates that came with them are now hitting the end of their service life at the same time. That’s the work we do most. We’re not steering you toward a full replacement when a post reset and two new hinges will do the job. Adrian Vance started this company in 2014 on commercial access-control work, and that habit carried over: every Bedford gate we touch leaves with a written record of what we found, what we changed, and a photo log if it’s a bigger repair.
Bedford homeowners repeatedly tell us the same thing: other companies quoted over the phone and changed the number on site. We don’t do that. The price we hand you before work begins is the price on the invoice when we’re done. That’s Haven Standard Clause 1, and it applies to every job in Bedford, from a simple latch alignment near Central Drive to a full operator replacement off Forest Ridge.
Our Gate Repair Services in Bedford
Hinge & Post Repair
In Bedford’s older subdivisions, the most common repair isn’t a hinge swap. It’s a post that’s heaved in the expansive clay. Original posts set in the 1970s and 1980s have shifted two to four inches out of plumb over decades of wet-dry cycles, and no amount of hinge adjustment fixes that. We pull the post, dig the footing past the active clay line, re-pour deeper, and reset the gate so it swings true. The price is written before we start, and you’ll see photos of the old footing and the new pour before we back out of the driveway.
Gate Realignment
A gate that drags, won’t latch, or has a gap at the top corner is usually a realignment job. In Bedford, the cause is almost always the same: the hinge post moved, not the gate panel. We measure the reveal on both sides, check plumb on the post, and correct the root cause rather than shimming the hinges and calling it done. For homes near the Shady Brook neighborhood or along Pipeline Road, this is often the difference between a repair that lasts and one that fails again by spring.
Automatic Gate Repair
Bedford has a lot of automatic swing gate operators installed in the 1990s and early 2000s. When they fail, it’s usually the control board, a limit switch, or a photo-eye that’s drifted out of alignment. We service nine major automation brands including DoorKing, Elite, and Mighty Mule, so we work on the operator already mounted on your property rather than pushing a replacement. One caution specific to Bedford’s older systems: operators from the mid-90s often lack the safety photocells required under today’s UL 325 entrapment standards. In some cases a photocell can be added; in others, the retrofit isn’t possible and an operator replacement is the honest answer. We’ll tell you which one you have and why, with a written price either way.
Electric Gate Repair
When a Bedford gate opens fine manually but won’t respond to the remote, keypad, or intercom, the issue is electrical. We trace the wiring, test the control board, check the receiver, and identify whether the problem is the motor, the transformer, or a corroded connection. Bedford’s clay soil holds moisture, and we see plenty of low-voltage wiring failures where the line runs underground through saturated ground. Our techs arrive with a name and photo sent before the visit, and you’ll get a written diagnosis with the cost to fix it before any work proceeds.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Bedford
Bedford driveways have a mix of operator brands depending on when the system went in. We carry parts and service Ghost Controls, DoorKing, Elite, and Mighty Mule, along with the rest of the nine major automation brands we support. If your gate motor is from a brand we didn’t name here, call anyway. We can usually source the board, arm, or sensor the same week and get your gate moving again without a full system changeout.
Common Gate Repair Problems We See in Bedford Homes
- Heaved posts and dragging gates. Bedford’s Blackland-adjacent clay shrinks in the July and August heat and swells when the fall rains come, moving fence posts seasonally. A gate that scraped the ground in August may swing free in October, then scrape again next summer.
- Worn latch hardware on 70s and 80s wood gates. The original slide-bolt and thumb latches on Bedford’s brick ranch homes have 40 to 50 years of wear on them. Many are beyond adjustment and need replacement with modern hardware that engages cleanly.
- Obsolete operator control boards. Automatic gate openers installed before 2000 frequently run on boards that are no longer manufactured. When those fail, the repair is a retrofit with a current board or a new operator. We’ll show you the board’s part number and explain what’s still available before you spend anything.
- Hail damage to panels and pickets. Bedford sits in North Texas Hail Alley, and spring storms routinely dent ornamental iron gates and split aging wood pickets. After a hail event, we see a wave of panel repairs and realignments across the city’s established subdivisions.
Pricing for Gate Repair in Bedford, TX
Most hinge and latch repairs in Bedford run $95 to $240, depending on how many hinges we’re replacing and whether the gate needs realignment as part of the job. Post resetting with a deeper footing typically lands between $350 and $650 per post, and that includes removing the old post, digging past the clay line, re-pouring, and resetting the gate. Automatic gate repair runs $165 to $420 for common fixes like limit switch adjustments, photo-eye realignment, and receiver replacement; a full operator swap starts around $800 and goes up based on brand and arm type. Your price is written and handed to you before any work starts. Call (817) 572-8590 and we’ll give you that number in person, not over the phone.
We Also Serve Cities Near Bedford
Our Gate Repair team works throughout the Mid-Cities. Along with Bedford, we regularly serve Colleyville, Euless, Hurst, and North Richland Hills. If you’re in one of those cities and dealing with a sagging post or a dead operator, you’ll get the same written-price standard on your job that we deliver to every Bedford address.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Bedford
The hinge adjustment was never the real problem. The post moved. Bedford’s clay-heavy soil heaves and settles with every drought and rain cycle, and a post set 40 years ago has slowly leaned out of plumb, pulling the gate down with it. Adjusting hinges on a heaved post is a temporary fix. The permanent repair is pulling the post and resetting the footing past the active clay line. Call (817) 572-8590 and we’ll confirm whether the post is the problem before quoting anything.
Sometimes, but not always. If your operator’s control board has an auxiliary input for a photo-eye, we can often add one and bring the system closer to current UL 325 entrapment standards. If the board predates those inputs, no retrofit is possible and an operator upgrade is the only code-compliant path. We’ll show you the board and explain what it can and can’t do, with a written price for whichever route you choose.
Hail dents ornamental iron panels, strips paint, and splits wood pickets along the grain. Bedford’s spring storms routinely cause this damage, and the worst hit areas are usually gates facing north and west. We quote panel repair, picket replacement, and full panel replacement depending on the extent of the damage, always with a written price before work begins.
At minimum, 30 to 36 inches. But in Bedford’s established neighborhoods, we recommend going deeper, past the active shrink-swell zone, which often means 40 inches or more. The original posts set in the 1970s and 1980s were typically sunk 24 inches in concrete, and that’s precisely why they’ve heaved. A deeper footing set below the active clay line resists the seasonal movement that keeps pulling Bedford gates out of alignment.
Yes, in many cases. If the post is plumb and the hinges are intact, replacing only the panel is a clean way to get another decade or more out of your gate. We’ll measure the opening, fabricate the panel to fit, and rehang it on the existing hardware. The price is written before we start, so you’ll know the cost of the panel work separately from any post or hinge work we recommend.
Our Field Notes: A 1974 Brick Ranch in Bedford’s Core
Our crew was called to a 1974 brick ranch in the neighborhood around Bedford’s central core. The owner’s cedar swing gate dragged a two-inch trench in the clay every time it opened. The original hinge post had heaved a full three inches out of plumb, pulling the latch far enough out of alignment that it hadn’t caught properly in months. We didn’t shim it. We pulled the post, dug the footing down past the active clay line, and re-poured with a deeper concrete base before resetting the gate. Then we realigned the original slide-bolt latch so it finally caught without a fight. That’s the repair pattern we see house after house in Bedford’s older subdivisions, and it’s the reason we start every quote by checking the post before we touch a hinge.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Bedford’s established neighborhoods since 2014.
Gate Repair in Nearby Areas
