Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bedford
Gate installation in Bedford runs between $1,800 and $6,400 for most residential projects, depending on whether we’re hanging a single pedestrian gate or a full double driveway swing with automation. That includes the post footings, which matter more here than in most North Texas cities. If you live in an older Bedford neighborhood off Harwood Road or Forest Ridge Drive and your existing gate drags a trench through the clay, call us at (817) 572-8590. We’ll look at the posts before we quote you anything, because in Bedford the footing is usually the problem, not the gate panel.
Why Vance Gate Repair Bedford Is Bedford’s Preferred Gate Installation Company
Most of Bedford’s housing stock was built between the late 1960s and early 1990s, and those original fence posts are now 35 to 55 years old. Our crews work those streets weekly, and we know what they look like before we arrive: brick ranches and split-levels on quiet cul-de-sacs, mature oaks shading the driveway, and gate posts that have been heaved out of plumb by decades of Blackland clay movement. That local familiarity means we don’t show up quoting a generic hinge-and-latch job. We look for the footing problem first.
Bedford homeowners regularly tell us the same thing: a previous company adjusted the hinges, maybe replaced the latch, and the gate sagged again within a year. That’s the clay, not the hardware. Our written estimates in Bedford always note the post condition, the footing depth, and whether the gate leaf itself is still square. You get that in writing before we touch anything. Under our Haven Standard, Clause 1, you get a written price before work starts. No verbal estimate, no surprise invoice at the end.
Every Vance technician who comes to Bedford is background-checked and uniformed, and you’ll get a name and photo before arrival. We answer calls live, 24/7, so when a gate is stuck half-open at 10 p.m. and the driveway is exposed, a person picks up. Not a voicemail loop. We’ve served Bedford long enough to know the difference between a quick operator reprogram and a post footing that needs to be pulled and re-poured, and we say so on the estimate.
Our Gate Installation Services in Bedford
Swing Gate Installation
Swing gates are the most common gate type in Bedford’s 1970s and 1980s subdivisions, and they’re also the most vulnerable to the local soil. A single swing gate on a short pedestrian path works fine until the post shifts. A double swing gate across a full driveway has twice the lever arm against the posts, and in Bedford clay that means we’re regularly digging footings deeper than code minimums to get below the active swell zone. We set posts in concrete to a depth that survives the July shrink and the October rains.
Double Gate Installation
Double gates across Bedford driveways need two things most installers skip: matched post depth and a center stop that keeps both leaves aligned through seasonal ground movement. We install heavy-gauge steel frames for double gates in Bedford more often than wood because a 14-foot wood leaf warps in the local heat. If you want the wood look, we build the frame from steel and clad it in cedar. The frame holds the square; the wood is just the face.
Driveway Gate Installation
A driveway gate in an older Bedford neighborhood usually means working around existing landscaping, mature oaks, and sometimes no power at the gate location. That last condition is common in the city’s core subdivisions, where the house was built before builders ran conduit to the driveway. We install solar-powered operators when there’s no mains power nearby, but we size the panel for Bedford’s specific shading problem: those 40-year-old oaks over the driveway. An undersized panel on a shaded Bedford lot leaves you with a dead operator by the second cloudy week.
Pedestrian Gate Installation
Pedestrian gates in Bedford’s established neighborhoods often hang on the original 1970s posts, and those posts are tired. A narrow walk-through gate still needs a footing deep enough to resist the clay, especially if it’s the only access point to the backyard. We install pedestrian gates with either matching wood or powder-coated steel, and we always check the post for rot or heave before mounting anything to it. A new gate on a heaving post is a gate you’ll rehang next spring.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Bedford
We work on whatever equipment is already on your Bedford property. That includes Gate Installation systems and automation from Ghost Controls, DoorKing, Elite, and Mighty Mule, among the nine major brands our technicians service regularly. If your existing operator is a Ghost Controls on a solar panel and you’d rather stay with that brand for a new gate, we’ll quote that. We don’t steer Bedford customers toward a replacement brand just because it’s easier for us. Parts for those brands are stocked at our metro office and dispatched to Bedford daily, which keeps most installs on schedule without waiting on a distribution center.
Common Gate Installation Problems We See in Bedford Homes
- Heaved hinge posts from Blackland clay. Technicians working Bedford’s older interior subdivisions routinely find wooden gate posts lifted two to four inches out of plumb after five decades of wet-dry cycles. A hinge adjustment cannot fix a shifted footing; the post has to be pulled, the hole dug deeper, and the concrete re-poured below the active clay zone.
- Undersized solar panels in shaded driveways. Many Bedford split-levels and brick ranches have no conduit or mains power near the driveway. When a solar gate opener gets installed with a panel sized for an open field but mounted under a mature oak canopy, the battery drains and the gate fails, usually the week after the installer leaves.
- Wide driveways with the wrong operator. A double swing gate spanning a 16-foot or wider driveway needs an operator rated for that span and that leaf weight. We see Bedford installations where a pedestrian-rated swing arm was bolted to a full driveway gate, and the motor burned out within a season. The post, the hinges, and the operator all have to match the actual gate dimensions.
- Reusing old posts for new gates. It’s tempting to save money by setting a new gate on the existing posts. In Bedford, especially in homes built before 1985, those posts are often split below grade or leaning under the fence line. Mounting a new gate on them means paying for the same failure again within one wet-dry cycle.
Pricing for Gate Installation in Bedford, TX
Here are honest numbers for the Bedford market. A basic single swing pedestrian gate with new posts and hardware runs between $1,800 and $2,800. A double driveway swing gate, steel-framed and cedar-faced, is typically $3,800 to $5,400 installed, including both posts set below the active clay line. Adding a quality swing gate operator from a brand like DoorKing or LiftMaster adds $1,200 to $2,600 depending on whether there’s power at the location or we’re building out solar. A full driveway gate with automation, keypad entry, and safety photocells usually lands between $5,800 and $6,400 in Bedford. Every quote on our side is written before work starts. You’ll see the post depth, the operator model, and the total price in black and white. Call (817) 572-8590 for a free written estimate at your Bedford home.
We Also Serve Cities Near Bedford
Our crews work throughout the Mid-Cities and into the surrounding Tarrant County communities, including Bedford, and neighboring Colleyville, Euless, Hurst, and North Richland Hills. If you’re in any of those areas and need Gate Installation, the written-price guarantee applies the same way it does on every Bedford job.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bedford
Because the post is moving, not the hinges. In Bedford’s expansive clay, the original concrete footing under a 1970s or 1980s gate post sits above the active shrink-swell zone, and every summer and fall the post lifts and drops a few millimeters. Over 40 years, that’s inches. New hinges only transfer the sag to the new hardware. The permanent fix is pulling the post, digging the footing below the active clay line, and re-pouring it. We do this on Bedford installs as a standard step, not an add-on. Call (817) 572-8590 and we’ll inspect your footing before quoting any hinge work.
Yes, if the panel is sized correctly for the actual sun your gate receives. That’s the caveat most Bedford homeowners don’t hear. A solar panel under a mature oak canopy or facing a north eave produces a fraction of its rated output. We measure the shade pattern at the proposed panel location and size the panel and battery for the worst month, not the best. Solar gate openers work in Bedford, even on older lots with no conduit at the driveway, but they have to be spec’d honestly. We’ll show you the numbers in writing before any parts are ordered.
Yes. Any automated gate in Bedford must meet current UL 325 standards, which means entrapment protection in both directions of travel. That includes primary protection like photo-eyes, also called photocells, which stop and reverse the gate if the beam is interrupted, and secondary protection such as contact edges or inherent reversal sensors built into the operator. On Bedford installs we also set the closing force low enough to stop on an obstruction without reversing at full crushing force. This is standard on every automated gate we install, including solar systems.
It depends on the operator’s duty cycle and the gate leaf weight, but quality residential operators handle a single leaf up to 16 feet and a double leaf up to 20 feet when the posts and hinges are built for that span. On wider Bedford lots with long driveways and no power at the property edge, we often recommend heavy-duty operators built for solar duty, not big-box residential kits. The lever arm on a 20-foot double gate is punishing on hinges and posts, and in Bedford clay that means the post footings have to be deeper and larger than standard. We’ll quote the operator and the footings together so the system survives the full travel without duty-cycle burnouts.
Because the post below the hinge is still moving, and the hinge adjustment just realigned the gate to a moving reference point. Bedford’s clay causes posts to heave upward in winter and spring wet periods and settle in July and August. If that post is anchored in a shallow footing above the active zone, the gate leaf rises and falls with it. The only way to stop the trenching is to pull the post out, dig deeper, and set a new, longer post below the shrink-swell line. We see this pattern repeated house after house on the same block in Bedford’s core neighborhoods. When we fix it, we photograph the old footing depth and the new one so you can see what was actually done. Call (817) 572-8590 for an exact quote on pulling your heaved post. Estimates are free.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Bedford since 2014.