Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Arlington
Gate installation in Arlington starts with a written price before any work begins. For a standard cedar swing gate, most Arlington homeowners pay between $850 and $1,900, depending on width, post replacement, and whether an operator is included. A steel or ornamental driveway gate runs higher, typically $2,400 to $5,600 installed. We serve every Arlington neighborhood, from Interlochen to Dalworthington Gardens, and you’ll speak to a live person when you call (817) 572-8590.
Arlington’s gate work is different from Fort Worth or Grand Prairie. The soil here fights you. Blackland Prairie clay expands and contracts so aggressively through drought and rain cycles that a hinge post set without concrete below the active layer will lean again within a year. We set posts below that zone as standard practice, because we’ve seen what happens when nobody does.
Why Vance Gate Repair Bedford Is Arlington’s Preferred Gate Installation Company
Our crews drive Arlington streets every week for Gate Repair in Arlington. We know the 1960s ranch subdivisions in east Arlington where cedar board-on-board privacy gates are now 40 to 55 years old and failing in waves. We know the newer HOA communities along Highway 360 and Matlock Road where ornamental iron gates require different welding and hardware sourcing. That local familiarity means we arrive with the right parts on the truck, not a promise to come back later.
Adrian Vance started this company in 2014 after years of commercial access-control work, and that documentation habit carried over to residential gates. Every installation in Arlington leaves you with a written scope, a written price handed over before work starts, and a photo record of what was done. Under Haven Standard Clause 4, that evidence is included on every job at no additional charge.
We’re independently owned and operated, not a franchise. Every technician dispatched to an Arlington home is background-checked and uniformed. You get the name and photo of your technician before arrival. That’s how we’ve handled 22,000+ gate repairs and installations across the metro, every one with a written price before the first tool came off the truck.
Our Gate Installation team covers the full range: driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. When you call the Arlington line, you’re talking to a person who can schedule a free measure and get you a written quote, not a voicemail loop.
Our Gate Installation Services in Arlington
Swing Gate Installation
Swing gates dominate Arlington’s residential stock, from the aging cedar gates in Sherwood Forest to the ornamental steel in newer Dalworthington Gardens estates. A flush-set hinge post in Arlington’s clay will lean within 12 to 18 months, which is why we excavate below the active shrink-swell layer and set every post in concrete before mounting the gate. We measure the driveway grade, confirm swing clearance, and match the gate to your HOA’s recorded architectural standard before ordering anything.
Pedestrian Gate Installation
Pedestrian gates in Arlington need the same post discipline as their larger driveway counterparts. In neighborhoods like Pantego and the older sections of central Arlington, we routinely replace leaning pedestrian posts that were originally set in shallow footings decades ago. We install pressure-treated cedar, ornamental steel, and aluminum pedestrian gates, with or without keypad entry, and we photograph the footing depth before backfilling.
Sliding Gate Installation
Sliding gates are the natural choice for Arlington properties with short setbacks or driveways that slope toward the street. The track must be laid on a reinforced concrete pad, and in Arlington’s clay that pad needs proper compaction and drainage so the track doesn’t heave. We service and install cantilever and V-track slide gates, and we handle the operator installation, safety photocells, and loop detectors that a working slide gate requires.
Double Gate Installation
Double driveway gates in Arlington demand precise alignment across two posts, two gate leaves, and often two operators. The wider the opening, the more the clay movement works against you. We pull string lines, shim and level, and photograph every adjustment so the record exists for future service. For Arlington HOAs requiring double ornamental iron gates, we coordinate the finish and hardware style with your management company before we weld anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Arlington
We work on whatever your gate has, not whatever we happen to sell. That includes LiftMaster, FAAC, Elite, Mighty Mule, and most major automation brands installed in Arlington homes. Whether you’re putting a new LiftMaster operator on a cedar swing gate in Oakhurst or servicing a Mighty Mule arm that’s cycling badly on a Matlock Road property, our techs have the wiring diagrams and torque settings memorized. The written record of the brand, model, and settings goes in your job file before we leave.
Common Gate Installation Problems We See in Arlington Homes
- HOA architectural rejection. Arlington subdivisions with recorded architectural standards are strict about gate height, style, and finish. We’ve seen owners pay for a full gate removal and reinstallation because the style wasn’t submitted for approval first. We ask for your HOA’s gate specification before we order the first board.
- Hinge post lean. When the footing stops above Arlington’s shrink-swell clay, the post migrates out of plumb within a year. Then the gate drags, the latch stops lining up, and the operator motor strains and burns out. We set posts below the active clay zone and document the depth with photos.
- Gate operator overheating. July and August on a west-facing Arlington driveway means direct sun from about 1 p.m. until sunset. Black metal operator housings absorb that heat and trip thermal protection. We position operators to minimize direct sun exposure and confirm adequate cooling clearance during installation.
- Cedar gate frame rot at the hinge line. Arlington’s UV and summer heat dry cedar until the frame cracks, and once water gets into the hinge screws, the wood rots from the inside. By the time the gate sags, the hinge post is usually compromised too. We replace the frame, re-set the post, and use stainless or coated hardware to slow the next failure.
Pricing for Gate Installation in Arlington, TX
Gate installation in Arlington carries a range because no two driveways and no two HOAs are the same. Here are the numbers we quote most often:
- Cedar swing gate, standard 12-foot driveway: $850-$1,900, including new post hardware and a written photo record.
- Pedestrian gate, cedar or aluminum: $450-$1,200, depending on width and whether a keypad is added.
- Ornamental steel driveway gate, single leaf: $2,400-$4,200, fabricated to your HOA’s height and finish requirements.
- Double ornamental steel driveway gate with operators: $4,800-$9,000, including two operators, safety edges, and loop detectors.
- Sliding gate with operator and track pad: $3,000-$6,500, depending on track length and pad prep.
The price you get is the price you pay. We hand you a written quote before any work starts on your Arlington property, and we don’t come back later with an invoice bigger than the quote. If you already have a written estimate from another company, bring the paperwork. We’ll review it at no cost under Haven Standard Clause 1. Call (817) 572-8590 and we’ll schedule a free measure and written quote.
HOA Approval and Arlington’s Gate Reality
If your Arlington home sits in a subdivision with a mandatory HOA, your gate installation starts at the management office, not at the fence line. Most Arlington HOAs with recorded architectural standards require written approval for gate style, height, finish, and sometimes even the hinge type before installation. We’ve watched owners skip that step and pay twice: once for the install, then again for removal and reinstallation after the committee flagged the gate at the next walkthrough.
The practical move is to request your HOA’s recorded gate specification and send it to us before we quote. We’ll match the height, the board profile, the stain or powder-coat finish, and the hardware style to what your subdivision’s architectural committee has already approved. This matters especially in neighborhoods like Interlochen, where cedar privacy gates have a specific look, or in the iron-gate communities along Matlock Road, where the finish has to match the fence that the developer installed 20 years ago.
Arlington’s soil compounds the HOA problem. Blackland Prairie clay expands when it rains and contracts in drought, and that movement levels a shallow-set gate post faster than anything else we see. A gate that passes the architectural review on day one can still be leaning and dragging by the next spring if the footing wasn’t set below the active clay layer. We set every post in concrete below that zone, photograph the depth before the concrete goes in, and hand you the evidence. That’s the difference between a gate that looks right and a gate that stays right through Arlington’s wet and dry cycles.
Our crew replaced a warped cedar swing gate in the Dalworthington Gardens area after the hinge post pulled 2 inches out of plumb following the spring rains. We excavated through the clay, set a new 6×6 post in a concrete footing below the active zone, and installed a LiftMaster gate operator with safety photocells, then coordinated with the HOA management company on the stain finish to match the subdivision’s architectural standard. The post hasn’t moved since, and the photo record is in the job file.
For gated communities with a shared entry gate, the coordination runs through the management company, not the individual homeowner. We work with Arlington HOAs and property managers on pedestrian gates, keypad systems, and shared slide gates where the residents expect access every day. When a shared entry gate fails near the Entertainment District around AT&T Stadium and Globe Life Field, the wear is different from residential use: hundreds of cycles in a single event day, not three or four. Motors, loop detectors, and limit switches wear out faster. We plan service around the Cowboys and Rangers calendars because the repair window actually shifts with the schedule.
Arlington’s Climate and What It Does to Gates
Arlington summers run 100-105°F for weeks at a time, and the UV is unrelenting on west-facing driveway gates. Cedar dries and cracks. Metal gates and operator housings expand and contract through the daily temperature swing, loosening hinge screws and stressing welds over a few short years. We’ve pulled into Arlington driveways in July and found operator housings hot enough to trip their own thermal protection before the safety photocell is ever tested.
The flip side is ice. Winter Storm Uri in February 2021 loaded thousands of Arlington’s cedar gates with ice and snapped boards and hinges across whole subdivisions. That event exposed how many older gates were already near the end of their service life. If your gate survived Uri with a patched board or two, it’s worth a structural look now, especially if the hinge post has been leaning through the rainy seasons since.
Arlington’s residential explosion from the mid-1960s through the 1980s, driven by Six Flags, the GM plant, and heavy suburbanization, left a huge uniform stock of cedar privacy gates now 35 to 55 years old. Entire streets in east and central Arlington are hitting replacement age at the same time. That’s why we keep cedar boards and standard 6x6s stocked and ready. We see the same failure pattern block after block, and we know what it costs to fix it right.
We Also Serve Cities Near Arlington
Our crews cover the cities around Arlington, including Grand Prairie, Fort Worth, Hurst, and North Richland Hills. If you’re in one of those areas, the same Gate Installation in Arlington standards apply: written price first, photographic evidence on every job, and a live person answering the phone at any hour. We coordinate dispatch from our Dallas-Fort Worth office and schedule Arlington jobs without the long windows.
Written by Arlington‘s gate installation team at Vance Gate Repair, under the direction of Adrian Vance, founder and owner since 2014.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Arlington
Yes, in most Arlington subdivisions with a mandatory HOA and recorded architectural standards, you need written approval for the gate style, height, finish, and sometimes the hinge type before installation. Always request the HOA’s recorded gate specification first. We’ll match our quote to exactly what the committee has approved, and we’ll coordinate with your management company so the gate doesn’t get flagged at the next walkthrough. Call (817) 572-8590 and bring the HOA’s spec; we’ll quote to it directly.
Because the post footing was set above Arlington’s Blackland Prairie shrink-swell clay. That clay expands when it rains and contracts in drought, and the movement heaves the post out of plumb within 12 to 18 months if the concrete doesn’t reach below the active layer. Proper installation means excavating below that zone and setting the post in concrete deep enough to stay put through wet and dry cycles. We photograph the footing depth before backfilling so you have evidence the post was set right.
Yes. We work with Arlington HOAs and property managers on shared pedestrian and slide gates, including operator installation, keypad or callbox integration, safety photocells, and loop detectors. Shared entry gates near the Entertainment District cycle hundreds of times on event days and wear components faster than a residential gate, so we recommend equipment rated for that duty. We coordinate with the management company on access and quote, and every visit includes a written record of what was set and replaced.
A steel gate anywhere in Arlington sits through the same summer heat and ice storms, but gates near I-30 and the Entertainment District see more road splash, salt residue, and pollution, which can accelerate surface corrosion if the powder coat is scratched or compromised. The gate itself isn’t singled out for rust; the real destroyer is Arlington’s heat and humidity cycling, plus any chip in the finish that lets water in. We inspect the coating during installation and address any exposed steel before it becomes a problem.
Sometimes, but not always. A sagging cedar gate often looks like a board or hinge problem, but the underlying cause in Arlington is frequently the hinge post leaning out of plumb because the original footing was too shallow for the clay. We’ll put a level on the post and photograph it. If the post is sound and plumb, we can replace the gate and hardware without disturbing the post. If it’s leaning, no new gate will fix the sag, and the post needs to be re-set below the active clay layer. Call (817) 572-8590 for a free measure and a written answer, with photos, before any work starts.
For a free measure and a written quote on any gate installation in Arlington, call (817) 572-8590. We’ll schedule a technician, hand you the price in writing, and leave you with the photo record to prove what was done.