Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Keller
A gate that won’t open or won’t stay closed is more than an annoyance here in Keller. It’s a hole in your property line. Most Keller gate repairs we handle fall into two groups: an operator that died after years of North Texas heat, or a post that’s shifted because the clay under it dried out. We get to Keller addresses fast, write the price on paper before touching a tool, and leave a photo record of everything we touched. Call (817) 572-8590 to talk to a live person about what’s happening with your gate.
Vance Gate Repair Bedford has been servicing the Dallas-Fort Worth metro since 2014, with dispatch coordinated from our DFW office and crews running calls in Keller every week. Gate Repair in Keller is all we do, so we already know the gate failures that show up on Saddlebrook Drive, in the Estates of Timberland, and across the Marshall Ridge subdivisions.
Why Vance Gate Repair Is Keller’s Preferred Gate Repair Company
Keller homeowners call us because we explain what we found in plain language, then hand over a written number for the fix. No estimate-by-vibe. No surprise invoice at the end. That’s Haven Standard Clause 1: have it in writing. And Clause 4: evidence on every job. That means before we leave, you’ll have photos of the failing post, the misaligned limit switch, the corroded hinge bracket, whatever we actually did. Other companies talk about trust. We show you the work.
The technicians we dispatch to Keller are background-checked and uniformed. Their name and photo are sent to you before arrival. You’ll know who’s walking onto your property. Whether your gate runs a LiftMaster, FAAC, Elite, or another of the nine major automation brands we service, the technician will speak its language. The job will be documented from the first reading to the final travel-limit calibration.
Our Gate Repair Services in Keller
Electric Gate Repair
Electric operators in Keller work against two enemies: the heat and the soil. August days over 100 degrees expand steel frames enough to bind swing gates that weren’t recalibrated for summer travel. Your operator may be perfectly healthy. The gate it’s pushing has simply grown. We test the motor separately from the load before recommending any replacement, because a healthy operator on a dragging gate is a waste of money to swap. And we photograph the start capacitor reading, the capacitor inrush, and the limit-switch setting before we change anything.
Automatic Gate Repair
Most automatic gate problems in Keller are not the motor. They’re the limit switch that’s lost its setting, the photo-eye that’s out of alignment after a post shifted, or a receiver board that’s no longer talking to your remote. We service LiftMaster, FAAC, Elite, and six other major automation brands without pushing you toward a brand swap unless the math on the old unit says repair would cost more than replacement. Most times, repair is the cheaper call. If we do recommend replacement, it’s because the operator is 20 or 30 years old and the control board is no longer manufactured. And we’ll price both options in writing before you decide.
Hinge & Post Repair
This is the repair call that defines Keller. Blackland Prairie clay swells when it’s wet and contracts when it’s dry, and it’s dry in Keller more often than not. Your gate post sits in that clay. The post pulls, the hinge takes the brunt, the gate leaf drops a quarter inch at the latch side, and suddenly your operator is working twice as hard. We excavate the footing, reset the post, and replace the hinge with a hardened steel bracket that doesn’t oval under load. The work’s boring to look at. It’s the only permanent fix. We’ll show you the photo of the old post leaning before it left its hole.
Gate Realignment
Keller’s seasonal clay movement means realignment isn’t a one-time event. A gate set plumb in a wet March will be dragging by late July. We don’t just push it straight and leave. We measure the reveal, set the hinge standoffs, and log the position so we can re-set it faster after the next drought cycle. You’ll get the numbers: before and after. If you live in a Keller HOA subdivision with ornamental dual-leaf entries, seasonal realignment should be part of your gate’s maintenance routine, not a surprise repair.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Keller
We service nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Keller, we mostly see LiftMaster and Elite swing-arm operators on the 1990s and 2000s buildout homes, with FAAC commonly running on the heavier ornamental iron in the estate lots. We stock the most common control boards, photo-eyes, and limit switches locally enough that a Keller repair usually doesn’t wait on a warehouse shipment. If your operator is dead and the gate is open, we’ll get you closed manually before we start ordering parts.
Common Gate Repair Problems We See in Keller Homes
- Drought-driven post lean. Keller’s clay soils shrink in July and August, pulling footings outward and dragging swing gates across paver driveways. The tell is a gate that works fine after rain and binds after three weeks of dry heat.
- Operator failures clustered around 20 to 30 years old. Keller’s master-planned subdivisions were built out mostly between 1993 and 2012. That means the swing-arm operators installed at construction are failing now, all within a few years of each other. We’re replacing more of them in Keller than in most nearby cities.
- Rust at gate bottom rails. Ornamental iron gates look great from the street, but many were fabricated without proper weep holes. Water settles in the bottom rail, rust works its way up the squares, and the welds rot from the inside. A rust repair done right means cutting out the rot, patching with new stock, and adding the drainage the original builder skipped.
- Photo-eye faults after rain re-saturates the ground. A trip or reversed gate right after a Keller downpour usually means a post moved enough to break the beam alignment. We reset the eye and then find out whether the post behind it is the real problem.
Pricing for Gate Repair in Keller, TX
We Also Serve Cities Near Keller
Our crews run Gate Repair calls across the northeast Tarrant corridor daily. We service North Richland Hills, Southlake, Colleyville, and Hurst alongside our Keller stops. Same written pricing. Same photo documentation. Same 365-Day Done Right Promise on every repair. If you’re a few minutes outside Keller’s city limits, you’re still inside our service area.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Keller
Because the clay under the gate posts has shrunk in the summer dry heat, pulling the hinge post outward and letting the gate leaf drop far enough to drag on the driveway. This is the single most common gate problem in Keller. We reset the post, rebuild the hinge with a hardened bracket, and recalibrate the operator’s travel limits to the current soil conditions. Call (817) 572-8590 if your gate is scraping now.
Yes. We cut out the rusted bottom rail, weld in new matching iron stock, add the weep holes the original gate should have had, and refinish the repaired section to blend with the existing metal. Most Keller ornamental gates are built from standard black iron, so matching the material is straightforward. Replacement is usually unnecessary unless the rust has spread through the stiles into the upper frame. A written quote before any cutting starts is the norm on every Vance Gate Repair weld job.
Because the post nearest the photo-eye moves after re-saturation and breaks the infrared beam’s alignment. FAAC operators are strict about beam integrity; even a two-inch shift will trip a fault and hold the gate open or refuse to close. We realign the eye, then check the post behind it. If the post moved, we’ll tell you. Bypassing the safety eye is not an acceptable fix. Call (817) 572-8590 and we’ll get your FAAC operator cleared.
Put your hand on the post while the gate is moving, or better, let us do it with a dial gauge. If the post visibly flexes or the gate leaf drops toward the latch side in dry months, the post is the problem. A healthy operator straining against a shifting post will draw more amps than it should, which will eventually kill the motor. We check the post first because in Keller it’s usually the post. In the Estates of Timberland HOA off Rapp Road, our tech found a 16-foot ornamental iron swing gate dragging across its brick paver driveway in August. The hinge post had pulled 430 pounds of lean after two months of drought, binding the FAAC operator’s rack and pinion. We excavated the footing, reset it plumb, rebuilt the hinge with a hardened steel post bracket, and recalibrated the operator’s travel limits. Then we told the owner the same fix would need a reverse adjustment after the next wet spring.
You should replace it now if you value a gate that opens every time. A 2003-era operator is already past its designed service life. Keller’s summer heat has been cooking that control board for two decades. When it fails, it’ll fail in the worst way: gate stuck open, or gate stuck shut, or a burned contactor that welds itself closed and keeps pushing on a jammed gate. Replacing it on your schedule costs the same as replacing it on the operator’s schedule. We’ll give you a written price for both the operator and the labor, with the brand of your choice, before you decide. Call (817) 572-8590 for a free estimate on a scheduled replacement.
Call for a Free Keller Gate Repair Estimate
Tell us what your gate is doing. You’ll talk to a person, not a voicemail. We’ll ask a few questions, likely know what’s wrong before we arrive, and schedule a visit to your Keller home with a named technician. The price will be in writing before any work starts. The photo record will be yours when the work’s done. And the 365-Day Done Right Promise says we’ll make it right if it isn’t, free of charge, for a full year. Call (817) 572-8590 now.
Written by Adrian Vance, Owner at Vance Gate Repair Bedford, serving Keller and the northeast Tarrant County area since 2014.
Gate Repair in Nearby Areas
