Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in North Richland Hills, TX
Gate access control in North Richland Hills usually means one of two jobs: retrofitting a keypad or intercom onto an existing driveway gate, or diagnosing why a system that worked yesterday now locks a homeowner out. Most of the calls we take here start with a gate that opens sometimes, a keypad that stopped reading codes after a storm, or an HOA requirement that a shared entrance gate match the original ornamental iron spec. What makes North Richland Hills different is the age of the housing stock and the clay beneath it. The same Blackland Prairie soil that heaves fence posts every wet-dry cycle also shifts gate frames by fractions of an inch, and a misaligned frame means a strike plate that no longer catches, a photo-eye that loses its beam, and a keypad that reads fine but releases a latch that’s binding. You can reach us 24 hours a day at (817) 572-8590, and a live person answers.
Why North Richland Hills Homes Are Different
North Richland Hills developed fast through the 1980s and 1990s, and that timing shows in the gates. The original wood privacy-fence gates enclosing backyards in neighborhoods like Home Town and the Smithfield area are now 30 to 45 years old, and many are failing in clusters. Wood checks and warps after enough North Texas summers above 100°F, hinge screws pull out, and the gate sags until it drags. At the same time, the expansive clay under much of Tarrant County swells in wet winters and shrinks in August drought, so posts that were straight in May can be racked by September and heaved again after a wet November. A repair that ignores post resetting fails again within a season. In the later HOA-governed subdivisions built along the Mid-Cities corridor in the late 1990s and 2000s, ornamental iron driveway gates are common, and many shared community entrances must match the original bronze or aged-black finish on file with the HOA. Showing up with a standard galvanized replacement gets a technician turned back.
Our Main North Richland Hills Services
North Richland Hills homeowners call about two things most often: a gate that will not open or close reliably, and a motor or opener that failed outright. Here is how each service works here.
Gate Repair in North Richland Hills
Repair work here usually starts at the hinges, the post, or the strike. On older wood gates, the hinge screws have lost their bite in checked wood, and on iron gates the clay soil has shifted the post enough that the latch no longer lines up. We reset posts in concrete where needed, replace hinges with properly rated hardware, and document every adjustment with photos before we leave. Read more at Gate Repair in North Richland Hills.
Gate Installation in North Richland Hills
New gate work in this city splits between replacing 30-to-45-year-old wood privacy gates and installing ornamental iron driveway gates in newer HOA subdivisions. If the property has an in-ground pool, the new gate must be self-closing and self-latching to meet Texas Department of Insurance and local code minimums. We measure, order, and install to spec. See Gate Installation in North Richland Hills.
Gate Motor & Opener in North Richland Hills
Motors and openers in this area take a beating from heat and ice. Summer accelerates wear on limit switches and control boards, and winter ice storms add sudden shock loads to slide-gate hardware. If the motor runs but the gate does not move, or the gate opens halfway and reverses, the fault is usually mechanical overload rather than a failed board. Details at Gate Motor & Opener in North Richland Hills.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in North Richland Hills
Gate access control work in North Richland Hills comes down to this: the system must read a code, a card, or a call and release the latch every time, in every season. When the gate frame shifts with the clay soil, a keypad may still accept the code while the strike binds and the gate stays closed. When a storm knocks out power to a phone-entry board, the system forgets its programming. These are the jobs we handle under the Gate Access Control service, and we start every visit by checking the mechanical alignment before we touch the electronics.
Keypad Entry
Signs you need it
The keypad accepts some codes but not others, or the gate opens only after several attempts.
What it costs in North Richland Hills
Keypad replacement runs $180 to $425 installed, depending on whether it is a standalone unit or tied into an existing automation board.
How we do it
We verify the gate is aligned, test the keypad signal, install the new unit, and photograph the programmed settings.
Video Intercom
Signs you need it
Visitors cannot reach you at the gate, or the video feed shows a blank screen while the audio still works.
What it costs in North Richland Hills
Video intercom replacement runs $650 to $1,500 depending on the camera and monitor type.
How we do it
We trace the existing wiring, replace the station and monitor, and set the call forwarding to your phone.
What Gate Access Control Costs in North Richland Hills
| Item | Typical range in North Richland Hills |
|---|---|
| Keypad entry system | $180 - $425 |
| Phone entry or card reader | $450 - $950 |
| Video intercom | $650 - $1,500 |
Can you add a keypad to an existing gate in North Richland Hills?
Yes. We wire a keypad into the existing opener or install a standalone receiver if the opener supports remote inputs. The price is written before work starts.
Do you service HOA community entrance gates here?
Yes, and we match the original ornamental iron spec and finish color on file with the HOA before ordering parts. Call (817) 572-8590 to schedule.
Gate Parts & Welding in North Richland Hills
Gate parts and welding work in North Richland Hills is defined by what the soil and weather do to metal and wood. The clay heaves posts out of plumb, the summer heat checks wood until hinge screws pull loose, and the winter ice loads slide-gate hardware beyond its rated travel. Most of the parts and welding jobs here are hinge replacement, post resetting, and rail repair on gates that are mechanically sound but structurally tired. You can see the full scope at Gate Parts & Welding.
Hinge Replacement
Signs you need it
The gate drags on one corner, or the hinge screws spin in the post without tightening.
What it costs in North Richland Hills
Hinge replacement runs $120 to $300 per hinge, including weight-rated hardware and realignment.
How we do it
We remove the old hinge, fill stripped holes, install the new hinge, and set the gate back to level.
Post Replacement
Signs you need it
The post leans visibly, or the gate swings on its own after being opened partway.
What it costs in North Richland Hills
Post replacement runs $400 to $1,100 depending on depth, concrete removal, and whether the post carries a motor mount.
How we do it
We dig out the old post and footing, set the new post in concrete below frost line, and re-hang the gate square.
What Gate Parts & Welding Costs in North Richland Hills
| Item | Typical range in North Richland Hills |
|---|---|
| Hinge replacement | $120 - $300 per hinge |
| Post replacement | $400 - $1,100 |
| Mobile welding repair | $150 - $600 |
Can you weld an ornamental iron gate without removing it?
Yes, we do mobile welding on site for most cracks and broken pickets. The gate stays in place while we repair it, and the price is written first.
Do you reset gate posts that shifted in the clay soil?
Yes, and we set the new post in concrete below frost line so it stays square through the next wet-dry cycle. Call (817) 572-8590 for a written quote.
Brands We Service in North Richland Hills
We service Ghost Controls, DoorKing, Elite, and Mighty Mule openers and control boards, and we keep common parts and transmitters stocked locally in DFW. Most parts are available same week or installed the day we arrive. See our brands for the full list.
Pricing for Gate Repair in North Richland Hills, TX
| Service | Typical range in North Richland Hills |
|---|---|
| Keypad entry system | $180 - $425 |
| Phone entry or card reader | $450 - $950 |
| Video intercom | $650 - $1,500 |
| Hinge replacement | $120 - $300 per hinge |
| Post replacement | $400 - $1,100 |
| Mobile welding repair | $150 - $600 |
| Gate rail repair | $200 - $500 |
| Gate roller replacement | $180 - $450 |
| Custom welding fabrication | $300 - $900 |
| Gate motor replacement | $650 - $1,400 |
Prices in North Richland Hills push higher when the clay soil has shifted a post enough to require concrete work, when the HOA requires a specific ornamental finish, or when an ice storm has bent slide-gate hardware past its travel. Every price is written and handed to you before any work starts, and the quoted number is the number you pay.
Neighborhoods We Serve in North Richland Hills
We work across the city, from the older established neighborhoods to the newer master-planned subdivisions. Dispatch is coordinated locally, and response time is typically within a few hours for emergency calls.
- Home Town
- Smithfield
- Clariden Ranch
- Fossil Creek
- Walker’s Creek
Service Area - Cities Near North Richland Hills
Beyond North Richland Hills, our crews also serve Hurst, TX, Bedford, TX, Colleyville, TX, and Fort Worth, TX. The same written-price policy and photo documentation apply everywhere we work.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in North Richland Hills
Most emergency calls in North Richland Hills get a technician on site within a few hours of your call. A live person answers at (817) 572-8590 any hour, and we dispatch locally rather than routing through a corporate queue.
That depends on the subdivision. For shared community entrances in HOA-governed areas, we match the original ornamental iron spec and finish color on file with the HOA before ordering parts. We can pull the requirement and coordinate with your management company.
Yes. For homes with in-ground pools, we install and repair self-closing, self-latching gates that meet Texas Department of Insurance and local code minimums. We document the spring tension and latch setting so the record is there if an inspection requests it.
Call (817) 572-8590 for a written, upfront estimate on any gate repair in North Richland Hills. A live person answers, and the price you are quoted before the work is the price you pay when the job is done.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Richland Hills Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.