Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterPedestrian Gate Repair and Installation in Bedford, TX
A pedestrian gate in Bedford, TX typically costs between $350 and $950 for standard repairs, while new installations range from $1,200 to $4,500 depending on material, locking mechanisms, and automation requirements. At Vance Gate Repair Bedford, we provide upfront, written pricing before any work begins, ensuring you know exactly what you are paying for before we touch a single tool. If you have a gate that won’t latch, a hinge pulling away from the brick, or an access control system that has failed, call us at (817) 572-8590 for a free estimate.
We specialize in residential and light commercial access control, bringing the same level of documentation to your home gate that Adrian Vance developed on commercial sites in 2014. Whether your gate is a simple manual walk-through or a sophisticated automated entry point using brands like DoorKing or Elite, we operate under The Haven Standard. This means you receive a written scope of work and a documented photo record of every adjustment we make. We are the local experts you call when you need reliable, transparent service for your Gate Installation in Bedford.
When You Need Pedestrian Gate Service
You typically need a professional technician when the gate no longer functions as a secure entry point or creates a safety hazard for your household. Because pedestrian gates often see higher traffic than driveway gates, hardware fatigue is common in the Bedford climate, where heat expansion and rapid shifts in humidity affect metal components.
* Sagging or Dragging Gates: If your gate is scraping against the concrete or failing to clear the latch post, the hinges have likely shifted. We assess the hinge mounting points to see if they need to be re-welded or if the posts themselves have moved due to soil shifts common in North Texas.
* Latch Misalignment: A gate that won’t stay closed is a security risk. Often, the latch receiver has moved slightly due to frame settling, requiring precise adjustment or a new strike plate installation.
* Access Control Failure: If you are using an electric strike or a keypad system like those from Ghost Controls or Mighty Mule, and the gate won’t unlock, we troubleshoot the low-voltage wiring and the power supply to isolate the failure point.
* Broken Springs or Closers: Hydraulic closers are essential for safety, ensuring the gate closes behind you. If your gate slams shut or refuses to close, the internal oil seal has likely leaked, requiring a replacement of the closer unit.
* Hinge Fatigue: Over years of use, hinges can bind or snap. We replace worn hinges with high-load-bearing alternatives that handle the weight of heavy iron or steel frames without binding.
If you are dealing with any of these issues, do not attempt to force the gate. High-tension components and heavy metal frames can cause injury if they fall or snap unexpectedly. Call (817) 572-8590 to have a licensed, uniformed technician inspect the system.
Our Pedestrian Gate Process
We follow a rigorous, documented process for every service call. Under Clause 4 of The Haven Standard, every visit includes a documented photo record at no additional charge. This ensures that you have a clear history of what was found, what was adjusted, and what was installed, which is invaluable for future maintenance.
1. Site Assessment and Diagnostic: Our technician arrives in a marked vehicle, confirms their identity, and begins by observing the gate’s operation. We check the plumb of the posts, the integrity of the welds, and the function of the latch or motor.
2. Written Price Presentation (Haven Standard Clause 1): Before we pick up a tool, we hand you a written quote. This price includes parts and labor. There are no surprise invoices at the end of the job.
3. Execution and Photography: Once you approve the quote, we perform the repair or installation. We photograph the “before” state, the repair process, and the “after” state. This creates a permanent record of the work performed.
4. Verification and Testing: We cycle the gate multiple times to ensure the latch engages properly and the closer speed is set correctly. If we installed an automated system, we test the access credentials and safety sensors.
5. Final Documentation: We hand you the written record of the work, including the part numbers used and the photo log of the adjustments. You also receive our 365-Day Done Right Promise, which covers the completed work for one full year.
BeforeAfterPedestrian Gate Pricing in Bedford
We believe in upfront pricing. We do not use “call for a quote” tactics; we provide a clear, written estimate based on the specific needs of your gate. The cost of a pedestrian gate project in Bedford generally breaks down into these categories:
| Service Type | Estimated Price Range |
|---|---|
| Latch or Hinge Adjustment | $150 - $350 |
| Hydraulic Closer Replacement | $250 - $550 |
| Electric Strike/Keypad Repair | $300 - $650 |
| Custom Gate Frame Repair/Welding | $450 - $950 |
| New Gate Installation (Standard) | $1,200 - $4,500+ |
Factors like the weight of the gate, the brand of the existing automation (such as LiftMaster or BFT), and the condition of the existing mounting posts will influence the final cost. We offer free estimates, so if you are comparing quotes, bring the paperwork from another company to us. We will review it at no cost to ensure you are getting a fair deal. Call (817) 572-8590 to discuss your project.
FAQs - Pedestrian Gate
How do I know if my pedestrian gate needs a simple adjustment or a full replacement?
Most gates can be repaired if the frame is sound and the hinges are salvageable. If the metal frame has rusted through or the gate posts are leaning significantly due to foundation issues, we may recommend replacement to ensure long-term safety. We provide an honest assessment during our initial visit and will always prioritize repair if it is a viable, safe option.
Can you fix my gate if it uses an electronic lock or keypad?
Yes, we service and install access control systems for pedestrian gates, including brands like Ghost Controls and DoorKing. We troubleshoot the wiring, power supplies, and logic boards to identify the specific point of failure rather than suggesting a full replacement of the entire system. Call (817) 572-8590 to have us diagnose your specific system.
Do you provide a warranty on your repairs?
Yes, every job we complete is backed by our 365-Day Done Right Promise. If the repair is not right, we make it right at no additional charge, with no argument and no expiration date within that one-year window. We stand behind our work because we document every step of the process.
What documentation do I get after the service is finished?
Under The Haven Standard, you receive a written scope of work, a detailed invoice, and a photo record of the adjustments made to your gate. This documentation is vital for your home records and ensures that any future technician-should you need one-has a clear history of what was performed on the system.
If you are in Bedford and need reliable, transparent gate service, Vance Gate Repair Bedford is ready to help. We are available to take your call 24 hours a day, 7 days a week. Call (817) 572-8590 today for a free estimate and experience the difference of working with a company that puts everything in writing.
Written by Adrian Vance, Owner at Vance Gate Repair Bedford, serving Bedford.