Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Bedford Homeowners
A new driveway gate in Bedford typically costs between $4,800 and $14,500 installed, depending on the gate style, material, automation package, and site preparation. Most residential installations are completed in one to two days once the gate and operator arrive on site. We are Vance Gate Repair, and we have built and installed gates across Bedford since 2014, with every job priced in writing before the first tool comes off the truck.
Installing a gate is not a handshake job. The concrete pad has to be right, the hinges have to carry the load, the operator has to be matched to the gate’s weight and cycle count, and the safety edges have to stop the gate the day it is installed and every day after. Adrian Vance started this company after years of commercial access-control work, and the habit of documenting everything carried over. You get a written scope, a written price, and a photo record of what went into the ground and onto the gate. If you want to talk through your Bedford property before you commit to anything, call (817) 572-8590.
What Our Gate Installation Service Includes
Every installation we do in Bedford starts with the same question: what is this gate supposed to do? Keep a dog in, keep a car out, slow down a solicitor, close off a side yard, or secure a driveway that faces a busy cut-through street. The answer determines the frame, the hinges, the operator, and the safety equipment. Here is what each type of installation involves.
Driveway Gate
A Driveway Gate is the most common installation we do in Bedford, and it is also the one where site conditions matter most. The gate has to open across a slope or a grade, clear a curb or a gutter line, and hold its alignment through years of Texas heat cycling. We survey the driveway approach before we quote anything, because a gate that binds on a sloped driveway is a gate you will curse every morning. Our driveway gate installations include the steel or aluminum gate, the hinge posts set in concrete, the operator matched to the gate’s weight, and the photo record of everything we installed.
Pedestrian Gate
A Pedestrian Gate is a separate walk-through gate installed beside the driveway gate or in a fence line. It keeps people from ducking through the vehicle opening when the driveway gate cycles. We see these most often on Bedford properties where the driveway gate is automated but there is no side access, so every visitor has to wait for the big gate to open. A properly hung pedestrian gate takes its own posts and its own latch, and we set it so it swings true and latches without a shove.
Sliding Gate
A sliding gate moves horizontally on a track or a cantilever system instead of swinging into the driveway. Bedford lots with a steep slope or a short setback often call for a slide gate, because there is no room for a swing arc. We install both track-guided and cantilever slide gates, and the distinction matters: a cantilever gate rides above the ground on rollers, so gravel, mud, and debris do not foul the track. The operator has to be sized for the travel distance and the gate weight, and we document the limit-switch settings before we leave.
Swing Gate
A swing gate is exactly what it sounds like: a gate that pivots on hinges and opens inward or outward. Single swing gates work for narrower driveway openings, while double swing gates cover wider ones and divide the weight between two leaves. In Bedford, where most driveways are flat enough for a swing gate to work well, this is often the most economical option. The critical part is the hinge post: we set it deep in concrete and brace it, because a leaning post is the number one reason swing gates start dragging within a few years.
Double Gate
A double gate is a pair of gate leaves that meet in the middle of a wide driveway opening. The common Bedford scenario is a two-car driveway where a single swing leaf would be too heavy and too slow. We install double gates with either two operators or a single operator with a slave mechanism, depending on the gate’s weight and how often it cycles. The two leaves have to be adjusted so they meet evenly and close without slamming, and we set the open and close stops so the operators are not fighting the hinges at the end of travel.
Security Gate
A security gate is a driveway gate built to a different standard: heavier frame, reinforced hinges, a tamper-resistant operator, and usually an access-control system tied to it. Bedford homeowners near busy corridors like Airport Freeway or Harwood Road sometimes want more than a visual barrier. We build security gates with welded steel frames and pair them with keypads, intercoms, and vehicle detection loops. The installation includes the same photo documentation every other job gets, plus a written record of the operator settings and the safety-edge test results.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We install and service gate operators from Ghost Controls and DoorKing more than any other brands in Bedford, because those two cover the residential spectrum well. Ghost Controls builds quiet, belt-driven swing operators that work well on lighter residential gates, and we have set the limits, the force, and the auto-close timing on enough of them to know their quirks. If your gate is heavier or cycles more often, DoorKing makes robust swing and slide operators that hold up to daily use, and we stock the common replacement parts for them.
We also work on Elite and Mighty Mule equipment when that is what is already on the property or what the homeowner prefers. Elite slide operators are common on wider Bedford driveways, and Mighty Mule is a frequent choice for budget-conscious single swing gates. The point is this: we are not tied to one brand, and we will not steer you toward replacing a good operator just because we make more margin on a different one. Whatever motor is on your gate or goes onto your new gate, we service it and document it.
BeforeAfterSigns You Need Gate Installation Right Now
- Your existing gate is rusted through at the hinge mounts. Bedford’s humidity and occasional ice storms take a toll on thin-gauge steel. Once the hinge plate starts pulling away from the frame, welding a patch is usually throwing good money after bad. A new gate with a properly sized frame stops the problem instead of postponing it.
- The gate drags or scrapes every time it opens. This usually means the posts have shifted or the hinges have worn out of round. Shimming and adjusting can buy time, but if the gate has to be lifted to latch, the geometry is gone. Replacement is often cheaper than repeatedly re-hanging a failing gate.
- Your operator is burning through limit switches or capacitors. When a motor is undersized for the gate it is driving, it works harder and fails sooner. A new installation matched to the gate’s actual weight and cycle count solves the root cause instead of treating the symptom.
- The gate no longer meets the safety standard you actually need. A gate without working photo-eyes or a pressure edge is a liability. If your current gate predates modern safety requirements, a new installation brings it up to code and gives you documentation that the safety devices were tested.
- You have no gate at all, and the driveway is the weak point. Bedford neighborhoods vary, and some streets see more foot traffic and vehicle traffic than others. If you have looked out a window and watched a stranger walk up your driveway, you already know the answer. A properly installed gate with an operator and a keypad closes that gap permanently.
Our Gate Installation Process - Step by Step
- 1
Site survey and written quote. We walk the driveway with you, measure the opening, check the grade, and look at the power situation. You get a written price before anything is ordered. No verbal estimate, no “we’ll figure it out as we go.”
- 2
Gate and operator selection. We match the gate material and the operator to your opening width, gate weight, and how many times a day it will cycle. If you want a specific brand, we work with it. If you want a recommendation, we give you one with the reasons attached.
- 3
Post setting and gate mounting. The hinge posts go into concrete footings sized for the load. We let the concrete cure before we hang the gate, because a gate hung on green concrete shifts and never comes back true. The gate is mounted and adjusted until it swings or slides without binding.
- 4
Operator installation and safety setup. We mount the operator, wire it to a dedicated circuit, and set the limit switches, force settings, and auto-close timing. Photo-eyes and safety edges are installed and tested. We photograph the final settings so there is a record of how the system was left.
- 5
Walkthrough and documentation. Before we leave, we show you how the gate works, how to operate it manually if the power is out, and where the keypad code is set. You get a written record of the part numbers, the operator settings, and a photo log of the installation. Every Bedford installation leaves with the same paperwork a commercial job would.
How Much Does Gate Installation Cost in Bedford?
For current Gate Installation pricing, a single swing gate with a basic operator in Bedford typically runs between $4,800 and $7,500 installed. A double swing gate with two operators runs between $7,000 and $11,500, depending on the gate material and the operator brand. A sliding gate installation ranges from $8,000 to $14,500, because the track or cantilever hardware and the larger operator add cost. Security gates with access control and vehicle detection start around $9,000 and go up from there based on the frame construction and the control system.
What moves the price: the gate’s size and weight, the material (aluminum costs more than steel but does not rust), the operator type and brand, the amount of site preparation, and whether we need to run a new power circuit. The best way to avoid overpaying is to get a written quote that lists the gate, the operator, the safety devices, and the labor separately. That is what we hand you at the site survey, and the price we write is the price you pay. No allowance for “unexpected conditions” that appear at invoice time. If you already have a quote from another company, bring it to us and we will review it at no cost.
Gate Installation Near Bedford - Our Service Area
We install gates throughout Bedford and the surrounding cities, including Hurst, Euless, Colleyville, North Richland Hills, Grapevine, Southlake, Keller, Irving, Arlington, Coppell, and Grand Prairie. Most Bedford installations are scheduled within one to two weeks of the site survey, depending on lead time for the gate and operator. If you are comparing Gate Installation in Hurst or Gate Installation in Euless, the scope and the written-price standard are the same. We are one company with one standard, and the geography does not change the paperwork.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Bedford
Gate installation is the process of setting a new driveway or pedestrian gate, mounting it on properly set posts, and installing and wiring the operator that opens and closes it. In Bedford, it also includes the safety devices like photo-eyes and pressure edges that stop the gate if something is in the way. A complete installation ends with a documented walkthrough, not just a gate that swings.
Most Bedford installations take one to two days on site once the gate and operator are delivered. The bigger variable is lead time: custom gate fabrication can take two to four weeks depending on the material and the shop load. We give you a written schedule when we give you the written price.
A typical single swing gate with an operator runs between $4,800 and $7,500, while a double gate or a sliding gate runs $7,000 to $14,500 depending on the size, material, and automation package. The quote you get from us is the price you pay, in writing, before the job starts. Call (817) 572-8590 and we will schedule a site survey and put numbers on paper.
Yes, we install and service Ghost Controls and DoorKing operators on new and existing gates in Bedford. We also work with Elite and Mighty Mule equipment. If you already own an operator and want it paired with a new gate, we can do that, and we will document the settings when we finish.
If you have an immediate security concern, call us and we will see how fast we can get to your Bedford property. Custom gates always have a fabrication lead time, but we can often install a stock gate and operator faster than a fully custom build. We do not promise a date we cannot keep, and whatever schedule we give you is attached to the written quote.
Every installation is covered by our 365-Day Done Right Promise. If the gate is not right within a year, we make it right at no additional charge. The gate and operator also carry their manufacturer warranties, and we keep a record of the part numbers and serials so a claim is not a research project.
Before we arrive, clear the area around the driveway opening so we have room to work and stage the gate. If you have irrigation lines or invisible fencing near the driveway, mark them or tell us during the site survey. We handle the concrete work, the wiring, and the cleanup, but knowing where utilities run saves time and avoids a cut line.
Schedule Your Gate Installation Service in Bedford Today
Call (817) 572-8590 to schedule a free site survey and get a written price for your Bedford gate installation. The estimate is free, the scope is specific, and the price does not move after you approve it. A live person answers the phone, and we will have Adrian Vance or one of our technicians out to look at your driveway.
Written by Adrian Vance, Owner at Vance Gate Repair Bedford, serving Bedford since 2014.