Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Southlake, TX
Most gate access control calls in Southlake start the same way: a keypad that worked for fifteen years suddenly won’t accept the code, or a remote that opens the neighbor’s gate but not yours. We work on those systems every week across Southlake, where the housing stock creates a specific problem. The custom estates built between 1993 and 2012 came with heavy ornamental iron gates and early automation systems, and those systems are now aging out together. Call us at (817) 572-8590 and a live person answers, any hour.
Why Southlake Homes Are Different
Southlake sits on North Texas expansive black-clay soil. It swells when it rains and contracts hard in summer drought, which means gate post footings heave and tilt seasonally. A gate that closed perfectly in April can bind against its post by August. That soil movement is the single biggest reason automated gates in Southlake fall out of alignment year after year.
The housing stock adds a second layer. Homes built during the 1998-2008 boom commonly received large tubular-steel or wrought-iron gates, ten to twenty feet wide and far heavier than typical suburban fencing. That weight stresses hinge posts, operator mounts, and concrete footings over time. When an operator fails on one of these gates, it is usually because the motor has been fighting the gate’s weight for two decades.
And Southlake’s HOA covenants and architectural standards usually require repairs and replacements to match existing ornamental ironwork precisely. Homeowners cannot simply swap a wrought-iron gate for an aluminum panel. Like-for-like restoration is the expectation, and it changes how we approach both parts sourcing and welding work here.
Our Main Southlake Services
These are the three services Southlake homeowners call us about most often, each with its own dedicated page covering local conditions, pricing, and what to expect.
Gate Repair in Southlake
Southlake’s heavy ornamental gates put constant stress on hinges, posts, and operator arms. When a gate starts dragging, sagging, or refusing to close, the cause is usually mechanical wear or soil movement, not the motor itself. Our Gate Repair in Southlake page covers the specific failure patterns we see across the city, what repair costs, and how we document every adjustment with photos before we leave.
Gate Installation in Southlake
New gate work in Southlake almost always involves matching existing ironwork, meeting HOA requirements, and engineering for black-clay soil. A gate installed without proper footing depth will heave within two seasons. Our Gate Installation in Southlake page walks through what a full installation includes, what drives cost on a Southlake property, and how we price the job in writing before any work begins.
Gate Motor & Opener in Southlake
Many Southlake gates run on operators installed during the 1998-2008 boom, brands like Elite, Viking Access, and early LiftMaster commercial units. Those operators are now failing city-wide at roughly the same time, and many of their parts are discontinued. Our Gate Motor & Opener in Southlake page explains what can be repaired, what should be replaced, and how we handle proprietary wiring on older systems.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Southlake
Gate access control in Southlake means the electronics that decide who gets in: keypads, remotes, phone entry, card readers, and video intercoms. Many of these systems were installed during the 1998-2008 building boom and are now failing together, often because original wiring diagrams are gone and parts are discontinued. This is the core of our Gate Access Control work here. Southlake’s climate adds a layer: February 2021’s ice storm froze operator mechanisms, cracked plastic control housings, and shorted circuit boards across the city in a single weather event, and we are still replacing components damaged that week.
Keypad Entry
Signs you need it
A keypad that works intermittently, accepts only some codes, or has corroded buttons after rain usually needs replacement or re-wiring.
What it costs in Southlake
Keypad replacement in Southlake typically runs $185-$450 depending on whether we can reuse the existing wiring or need to pull new conductor through conduit.
How we do it
We test voltage at the keypad first, photograph the original wiring before disconnecting anything, install or replace the unit, program codes, and leave you the photo log and wiring diagram.
Remote Control
Signs you need it
Remotes that open the gate from only ten feet away, work on some vehicles but not others, or drain batteries within weeks point to receiver or antenna trouble.
What it costs in Southlake
Receiver replacement and reprogramming in Southlake typically costs $150-$320, and adding a new remote is $55-$120 per unit.
How we do it
We identify your receiver frequency, test signal strength at the gate and from the driveway, replace or reprogram as needed, and document every programmed remote on the service record.
Phone Entry
Signs you need it
A call box that rings but won’t open the gate, drops calls, or has a dead keypad usually has a failing relay or damaged copper line.
What it costs in Southlake
Phone entry repair in Southlake typically runs $175-$400 depending on whether the relay, keypad, or wiring is at fault.
How we do it
We test the phone line at the demarc, check relay function, replace the failed component, and photograph the new settings before we leave.
Card Reader
Signs you need it
A reader that beeps but won’t release the gate, works for some cards and not others, or has a cracked faceplate needs diagnosis.
What it costs in Southlake
Card reader replacement in Southlake typically costs $225-$500 including programming existing credentials into the new reader.
How we do it
We test power and data at the reader, check the controller log for errors, replace the failed unit, and verify every card before we call the job done.
Video Intercom
Signs you need it
A video intercom with no picture, a dead microphone, or a monitor that won’t wake up usually has a failed power supply or a broken conductor.
What it costs in Southlake
Video intercom repair in Southlake runs $250-$700 depending on whether the monitor, door station, or wiring needs replacement.
How we do it
We check power at both ends, test continuity on the video conductor, replace the failed component, and photograph the final configuration.
What Gate Access Control Costs in Southlake
| Item | Typical range in Southlake |
|---|---|
| Keypad replacement | $185-$450 |
| Receiver replacement and reprogramming | $150-$320 |
| Card reader replacement with programming | $225-$500 |
Price is written and handed to you before any work starts. No surprises on the invoice.
Can you service the older access systems common in Southlake?
Yes. We work on discontinued Elite, Viking Access, and LiftMaster commercial units from the 1998-2008 era, and we document wiring before touching anything. Call (817) 572-8590 for a written quote.
Do you handle access control for HOA-governed gates?
We do, and we know Southlake’s architectural standards typically require matching equipment and finishes. We can review your HOA’s requirements before you commit to a repair. (817) 572-8590.
Gate Parts & Welding in Southlake
Gate parts and welding in Southlake usually means bringing a twenty-year-old ornamental iron gate back to working condition without replacing it. Heavy gates on black-clay soil wear out hinges, break welds, and bend rails over time. Our Gate Parts & Welding work here focuses on like-for-like restoration, matching existing ironwork in style and finish as Southlake’s HOA covenants require. We stock common replacement parts locally and can source or fabricate the rest.
Hinge Replacement
Signs you need it
A gate that sags toward the latch side, drags on the ground, or shows a visible gap at the hinge pin needs new hinges.
What it costs in Southlake
Hinge replacement in Southlake typically runs $180-$450 per pair depending on gate weight and whether the post is still sound.
How we do it
We support the gate, remove the old hinges, weld or bolt in the new ones, and photograph the alignment before and after.
Post Replacement
Signs you need it
A post that leans, has cracked concrete at its base, or lets the gate wobble when it moves needs to be re-set or replaced.
What it costs in Southlake
Post replacement in Southlake runs $400-$900 depending on depth, footing size, and whether we can reuse the panel.
How we do it
We dig the old footing, set a new post in concrete below the clay line, and brace it square before the concrete cures.
Rail Repair
Signs you need it
A bent bottom rail, a cracked top rail, or a gate that is visibly twisted usually needs the rail straightened or a section replaced.
What it costs in Southlake
Rail repair and straightening in Southlake typically costs $150-$350 per section.
How we do it
We cut out the damaged section, weld in a matching replacement, grind the joint smooth, and paint or powder-coat to match.
Gate Rollers
Signs you need it
A slide gate that shudders, jumps the track, or has flat spots on the wheels needs new rollers.
What it costs in Southlake
Roller replacement on a Southlake slide gate runs $120-$280 per roller including the carrier bracket if needed.
How we do it
We inspect the track, replace the worn rollers and any damaged carriers, and test the gate under motor power before we leave.
What Gate Parts & Welding Costs in Southlake
| Item | Typical range in Southlake |
|---|---|
| Hinge replacement per pair | $180-$450 |
| Post replacement | $400-$900 |
| Rail repair per section | $150-$350 |
Every job is priced in writing before any work starts, and every visit leaves a documented photo record.
Can you match the finish on my existing ironwork?
Yes. We match paint and powder-coat finishes to your existing gate, and we photograph the color match before applying. Call (817) 572-8590 to schedule a measure.
Do you weld on site or in a shop?
Both. Smaller repairs are welded on site at your Southlake property; larger fabrications move to our shop where we can control the finish. (817) 572-8590.
Brands We Service in Southlake
We service Ghost Controls, DoorKing, Elite, and Mighty Mule operators across Southlake, and we stock common parts for each locally. Turnaround on most parts is same week; discontinued parts we source through our supplier network. See our brands page for the full list.
Pricing for Gate Repair in Southlake, TX
| Service | Typical range in Southlake |
|---|---|
| Keypad replacement | $185-$450 |
| Receiver replacement and reprogramming | $150-$320 |
| Phone entry repair | $175-$400 |
| Card reader replacement | $225-$500 |
| Video intercom repair | $250-$700 |
| Hinge replacement per pair | $180-$450 |
| Post replacement | $400-$900 |
| Rail repair per section | $150-$350 |
| Roller replacement per roller | $120-$280 |
What pushes cost up in Southlake is gate weight, soil movement, and HOA finish requirements, all of which we account for in the written quote. You get the price before we start, and the price does not change unless you approve a change first.
Neighborhoods We Serve in Southlake
We work across Southlake and the surrounding estates, including:
- Carillon
- Timarron
- Shady Oaks
- Estes Park
- Southlake Woods
Typical response time for gate work in Southlake is same day or next morning, depending on the call time.
Service Area - Cities Near Southlake
Our Southlake crews also cover the neighboring communities. For gate work in Colleyville, TX, Grapevine, TX, Bedford, TX, or Euless, TX, each city page has local pricing and conditions specific to that area.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Southlake
Same day in most cases. A live person answers the phone 24/7 at (817) 572-8590, and we dispatch Southlake technicians directly. If a gate is stuck open or won’t close, we treat it as urgent.
Usually yes for visible changes like a new gate style or finish. For like-for-like repairs matching existing ironwork, most Southlake HOAs do not require prior approval. We can review your covenants with you before scheduling.
Yes, that is most of our work in this city. We service discontinued Elite, Viking Access, and LiftMaster systems, and we document the original wiring before making any changes. Call (817) 572-8590 for a written quote.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Southlake Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.