Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Fort Worth, TX
Gate access control problems in Fort Worth usually come down to two things: the Blackland Prairie clay shifting posts and latch hardware, and spring storm winds overloading underpowered operators. A gate that won’t open from the keypad, a remote that quit after a thunderstorm, or a phone entry system that rings to a dead line are all common calls across Ridglea, Wedgwood, and the acreage properties west of Loop 820. Call (817) 572-8590 and we’ll name the fix and the written price before anything gets touched.
Why Fort Worth Homes Are Different
Fort Worth sits on expansive clay that swells in wet winters and shrinks during summer drought. Gate posts heave out of plumb, concrete footer pads crack, and latch hardware that worked in March is off by half an inch in August. This repeats seasonally, which changes how we approach access control: a keypad or card reader mounted on a moving post will misalign with the strike, and a photo-eye aimed across a now-tilted gate reads the wrong line. We account for that movement in the mounting and wiring, not just the programming.
The housing stock compounds it. Ridglea, Wedgwood, and Westcliff are full of 1940s and 1950s brick ranch homes with aging ornamental iron swing gates on narrow drives. Walsh Ranch, Ventana, and Presidio Village have HOA-mandated gate aesthetics and newer LiftMaster or FAAC operators. Far-west acreage lots along Chapin Road and Lake Country Estates run heavy steel slide gates on long unpaved drives, often solar-powered because trenching power 300 feet from the street costs more than the operator itself. Fort Worth combines ranch hardware demands with high-end ornamental aesthetics in a way you don’t see in Dallas or Arlington.
Our Main Fort Worth Services
These are the three services Fort Worth homeowners call about most often. Each has its own dedicated page where you’ll find full pricing, sub-jobs, and local details.
Gate Repair in Fort Worth
A sagging ornamental iron gate on a Ridglea driveway or a slide gate that’s grinding on a caliche drive out west needs a different repair approach. We rebuild hinges, re-weld cracked frames, reset posts that the clay has heaved, and get the gate moving cleanly again. Swing gates on 1940s homes often have hardware that’s been patched repeatedly; we find the load point that caused the failure and repair it so the fix holds. See the full scope at Gate Repair in Fort Worth.
Gate Installation in Fort Worth
New construction in Walsh Ranch and Ventana comes with HOA aesthetic requirements, while older properties in Wedgwood or Westcliff may be replacing a gate that’s been there since the house was built. We measure, order, build, and install gates sized to the actual post spacing and wind exposure. A gate on an open-plains lot with 40 mph gusts needs sturdier hinges and a heavier frame than one sheltered by mature oaks. Full details at Gate Installation in Fort Worth.
Gate Motor & Opener in Fort Worth
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, which matters because Fort Worth drives are full of mixed brands. There’s no reason to swap a working FAAC because a repair shop only stocks LiftMaster. We diagnose limit switches, photo-eyes, and control boards, then give you the written price for the repair before we touch anything. Details at Gate Motor & Opener in Fort Worth.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Fort Worth
Gate access control in Fort Worth is what lets the right people in and keeps everyone else out: keypads, remotes, phone entry, card readers, and video intercoms mounted on the gate or the post. The specific problem many Fort Worth properties face is that the access device is mounted on a post or panel that the clay has moved, so the strike alignment drifts seasonally and the keypad or reader loses alignment with the latch. We correct the mounting, wire the device cleanly, and leave a documented photo record of what was moved, what was set, and what was installed. That’s the same habit we bring to every Gate Access Control job.
Keypad Entry
Signs you need it
The keypad works after several attempts, the membrane is cracked from sun exposure, or the gate opens intermittently from the keypad but fine from the remote.
What it costs in Fort Worth
Replacement keypad units installed in Fort Worth run $225-$575 depending on brand, weatherproofing, and whether the existing wiring can be reused.
How we do it
We meter the existing wire for voltage drop, mount the new keypad on a stable surface clear of the gate’s travel path, program the codes on site, and leave a written record of the wiring and programming.
Remote Control
Signs you need it
The remote works only from a few feet away, the gate opens on its own from stray signals, or a new remote won’t pair to the operator.
What it costs in Fort Worth
Remote control programming and replacement on Fort Worth gates typically runs $110-$380 depending on frequency, brand compatibility, and how many remotes are paired.
How we do it
We identify the operator’s frequency and rolling-code protocol, clear the receiver memory to drop old or lost remotes, pair the current units to the operator, and hand you a documented list of which remotes are active.
What Gate Access Control Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Keypad replacement | $225-$575 |
| Remote programming or replacement | $110-$380 |
| Intercom or phone-entry module | $500-$850 |
Do you install gate access control on existing gates in Fort Worth?
We do. We mount the keypad, reader, or intercom on the existing post or panel, run and weatherproof the wiring, and program the system to the current operator. The written price is set before we begin.
Can a gate access control system survive Fort Worth storms?
Yes, with proper mounting and sealed enclosures. Spring winds and driving rain are hardest on exposed keypads and card readers. We use weatherproof housings and position devices out of direct wind-driven rain wherever the site allows. Call (817) 572-8590 for a specific solution on your gate.
Gate Parts & Welding in Fort Worth
Gate parts and welding in Fort Worth cover the mechanical repairs that keep a gate standing and swinging true: hinges, posts, rollers, rail sections, and custom steel fabrication. The clay here shifts posts and the wind works loose welds, which means many parts replacements are about correcting the load path, not just swapping a hinge. We maintain a running inventory of common rollers, hinges, and receiver brackets across the nine brands we service, and a full Gate Parts & Welding repair includes cutting out the failed section, welding in new steel, grinding the welds, and prime-coating the work before we leave.
Hinge Replacement
Signs you need it
The gate drags on the ground, the hinge pin is visibly worn or cracked, or the gate leans hard toward the latch post.
What it costs in Fort Worth
Hinge replacements in Fort Worth range from $180-$520, depending on gate weight, post condition, and whether the old hinge must be cut off rather than unbolted.
How we do it
We support the gate with stands, remove the failed hinge, inspect the post for cracked welds or rot, weld the new hinge in place, and level the gate before releasing the load.
Gate Rollers
Signs you need it
The slide gate chatters or shudders as it moves, the rollers show flat spots, or the gate has worn grooves into the top rail.
What it costs in Fort Worth
Roller replacement on Fort Worth slide gates runs $110-$280 per roller set, and we replace them in matched pairs so the gate rides evenly.
How we do it
We jack the gate off the rail, unbolt the old rollers, mount the new set on the same centerline, and adjust the height so the gate rolls without binding.
What Gate Parts & Welding Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Hinge replacement | $180-$520 |
| Roller replacement | $110-$280 |
| Post repair or replacement | $450-$1,400 |
Can you weld a Fort Worth gate on site?
Yes. We run a mobile welding rig for structural repairs on ornamental iron and steel gates. The work is done in place, ground smooth, and prime-coated. The written price covers the full scope before the welder strikes an arc.
Do you stock parts for older gates in Fort Worth?
We stock common rollers, hinges, receiver brackets, and hardware for the nine automation brands we service. For unusual or discontinued parts, we fabricate a replacement to match the original dimensions. Call (817) 572-8590 and we’ll confirm what’s needed.
Brands We Service in Fort Worth
Our Fort Worth crews work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. We keep common parts for these brands on the truck: limit switches, photo-eyes, remotes, and control boards. Most repairs are completed in one visit with parts in our local inventory. See our brands for the full list.
Pricing for Gate Repair in Fort Worth, TX
| Service | Typical range in Fort Worth |
|---|---|
| Gate repair (single leaf) | $110-$320 |
| Gate repair (double leaf) | $130-$400 |
| Rack and pinion repair | $150-$310 |
| Gate motor and opener repair | $125-$300 (plus new circuit board if needed) |
| Full operator replacement | $650-$1,300 |
| Keypad replacement | $225-$575 |
| Remote programming or replacement | $110-$380 |
| Intercom or phone-entry module | $500-$850 |
| Hinge replacement | $180-$520 |
| Roller replacement | $110-$280 |
| Post repair or replacement | $450-$1,400 |
The price pushes up in Fort Worth when clay has heaved a post far enough that the surrounding concrete pad must be re-poured, or when wind damage has cracked a weld that requires cutting out a section of frame rather than a surface patch. Every price is written and handed over before any work starts, under Haven Standard Clause 1.
Neighborhoods We Serve in Fort Worth
We run gate repair and access control calls across the full Fort Worth metro. Our crews are usually in most neighborhoods within a day or two, and emergency calls are dispatched live with a named technician.
- Ridglea
- Wedgwood
- Westcliff
- Walsh Ranch
- Lake Country Estates
Service Area - Cities Near Fort Worth
In addition to Fort Worth, our crews cover the surrounding Tarrant County communities. If you’re in North Richland Hills, TX, Hurst, TX, Bedford, TX, or Keller, TX, we dispatch locally from the Dallas-Fort Worth office and carry the same written-price, documented-record standard on every visit.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fort Worth
A live person answers the phone 24/7. We dispatch a named, background-checked technician same day for urgent gate failures, especially when a gate won’t close and the property is unsecured. Normal repairs are usually scheduled within a day or two. Call (817) 572-8590 to confirm today’s availability.
Repairs to existing gates typically do not require a city permit, but new gate installations and some post replacements in HOA-governed communities like Walsh Ranch or Ventana require architectural review. We flag that during the estimate and work within the HOA’s written requirements.
Yes. Solar operators on far-west properties are a common service call, especially after cloudy stretches and winter storms drain the battery bank. We test the solar charge path, replace spent batteries, and program the manual release so you’re never locked out. Call (817) 572-8590 for a free estimate on any gate repair or access control job in Fort Worth.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.