Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Irving, TX
Gate access control in Irving splits into two very different jobs: the ornamental automated gates fronting Las Colinas corporate campuses, and the aging HOA-managed driveway gates across Valley Ranch and North Irving. The Blackland Prairie clay under the city heaves seasonally, throwing even recently installed posts and rails out of alignment. That means almost every access-control repair here starts with a structural check before any wiring gets touched. Call (817) 572-8590 and a live person answers, day or night.
Why Irving Homes Are Different
Most Irving residential gates were installed in the 1980s and 1990s, when Valley Ranch and North Irving were still taking shape. Those original operators are now 25 to 35 years old, and many were wired by a handful of original developers using nearly identical components. When one fails, we usually find the same failure pattern repeating across the neighborhood.
The bigger issue is the soil. Irving sits on expansive Blackland Prairie clay. Wet winters swell it; dry summers shrink it. Concrete gate posts move with the ground, and a post that shifts half an inch throws a swing gate far enough to strain the hinge, bind the operator, and burn out the motor. Ice storms add a second layer: freezing rain coats circuit boards and hinge pins, and operators rated for mild winters fail when ice loads exceed their torque. In Las Colinas, the commercial gates are newer and better documented, but they tie into building security networks, so a failed gate triggers a facility-wide alert rather than just a stuck driveway.
Our Main Irving Services
Two jobs dominate our Irving calls: access-control systems that have outlived their wiring or their keypads, and structural parts work where 30-year-old steel has fatigued against shifting clay. These three services cover the full scope of what we do in Irving.
Gate Repair in Irving
Structural gate repair in Irving usually means realigning a gate that the clay has moved, then replacing whatever the misalignment destroyed: bent hinge plates, stripped rail brackets, burned operator gears. On Valley Ranch estate gates, the original steel is often thick enough to repair rather than replace. We quote the repair in writing before work starts, and the completed job leaves with a photo record of every adjustment. Gate Repair in Irving covers the full scope, from bent frames to snapped welds.
Gate Installation in Irving
A new gate in Irving has to be engineered for soil that moves. We set posts deeper than the frost line requires, use concrete collars sized for Blackland Prairie expansion, and match the new operator to the gate’s actual weight instead of a generic rating. For Valley Ranch properties with HOA design requirements, we work from the association’s approved material and finish list before quoting. Gate Installation in Irving walks through materials, operators, and the permitting process.
Gate Motor & Opener in Irving
Most Irving motor failures we see are secondary: the gate moved out of alignment, and the operator burned itself out pushing against a bind. We test the full travel path before condemning a motor. When replacement is needed, we stock or can source same-week parts for DoorKing, Ghost Controls, and Elite operators common across Valley Ranch. Gate Motor & Opener in Irving details the brands and replacement process.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Irving
Access control in Irving means two very different jobs. On Valley Ranch driveway gates, it’s usually a 1990s keypad or telephone-entry board that’s finally failed after three decades of Texas sun and ice storms. On Las Colinas commercial gates, it’s an integration problem: a card reader or video intercom that stopped talking to the building’s security network. Our Gate Access Control work on both types starts the same way: we document what’s installed, test the signal path, and write the fix down before we start.
Keypad Entry
Signs you need it
The keypad lights but won’t trigger the gate, or some codes work while others don’t.
What it costs in Irving
Keypad entry repair or replacement in Irving typically runs $185 to $520 depending on whether the board, the housing, or both are failing.
How we do it
We test voltage at the keypad, check continuity to the operator, then replace the keypad and photograph the new wiring before closing the box.
Remote Control
Signs you need it
A remote that worked last week now needs ten presses from three feet away, or one remote works and the other doesn’t.
What it costs in Irving
Remote control programming or replacement in Irving usually runs $75 to $185 per remote, including the receiver reprogram if needed.
How we do it
We identify the existing frequency, match the transmitter, and test from the actual approach distance before we leave.
What Gate Access Control Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Keypad entry repair or replacement | $185 - $520 |
| Remote control programming or replacement | $75 - $185 |
| Phone entry system repair | $220 - $610 |
Do you service access control on HOA community gates in Irving?
Yes. Many Valley Ranch community entrances still run original 1990s telephone-entry or card-reader systems, and we repair those in place. We also work with Irving HOAs that want to upgrade entry hardware without replacing the gate itself. Call (817) 572-8590 with your community’s gate details.
Can you integrate my gate with my existing security system in Irving?
In most cases, yes. We match the gate operator’s outputs to your system’s inputs and document the signal path so your integrator can verify it. Commercial Las Colinas properties often need coordination with facility staff, which we handle directly. Estimates are free.
Gate Parts & Welding in Irving
Irving’s clay soil puts constant load on gate hardware. Hinges fatigue, posts creep out of plumb, and welds crack along the same stress points year after year. Our Gate Parts & Welding repairs address the part that failed and the reason it failed, which on Blackland Prairie is usually the ground moving underneath the gate.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, scrapes the ground, or makes a grinding sound when it opens.
What it costs in Irving
Hinge replacement on an Irving swing gate typically runs $140 to $320 per hinge, including realignment and lubrication.
How we do it
We lift the gate, cut out the worn hinge, weld in a new one sized for the actual gate weight, and photograph the final alignment.
Post Replacement
Signs you need it
The post leans visibly or the gate won’t latch because the post has shifted out of vertical.
What it costs in Irving
Gate post replacement in Irving typically runs $450 to $950 per post, depending on depth and the concrete footing required.
How we do it
We set the new post in a concrete collar sized for Irving’s expansive clay, verify plumb in two planes, and re-hang the gate on the new post.
What Gate Parts & Welding Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Hinge replacement | $140 - $320 per hinge |
| Gate post replacement | $450 - $950 per post |
| Custom welding repair | $120 - $400 per section |
Can you weld a gate without taking it off the property in Irving?
Yes, in most cases. We bring mobile welding equipment and repair cracked frames, broken pickets, and failed brackets with the gate still hung, as long as the damage is accessible. For structural repairs near the post, we may need to lift the gate. Estimates are free.
Do you carry parts for older Irving gates from the 1980s and 1990s?
We stock and source parts for the brands most common in older Irving installations, including DoorKing, Elite, and Mighty Mule. When a part is obsolete, we fabricate or machine a replacement unless replacement is the cheaper option. Call (817) 572-8590 with the part number if you have it.
Brands We Service in Irving
We service Gate Access Control and Parts & Welding jobs across the manufacturers common in Irving, including Ghost Controls, DoorKing, Elite, and Mighty Mule. Parts for older Valley Ranch and North Irving installations are sourced or machined locally when possible, with most jobs completed the same week. See our brands for the full list.
Pricing for Gate Repair in Irving, TX
| Service | Typical range in Irving |
|---|---|
| Keypad entry repair or replacement | $185 - $520 |
| Remote control programming or replacement | $75 - $185 |
| Phone entry system repair | $220 - $610 |
| Hinge replacement | $140 - $320 per hinge |
| Gate post replacement | $450 - $950 per post |
| Custom welding repair | $120 - $400 per section |
| Gate roller replacement | $160 - $420 per roller |
| Rail repair or replacement | $280 - $700 per section |
Irving pricing pushes toward the higher end when the clay has shifted a post and the repair includes excavation and a new concrete footing. Every price we quote is written down and agreed before any work starts, so the number on the page is the number on the invoice.
Neighborhoods We Serve in Irving
We work across Irving’s residential and commercial districts, from Valley Ranch estate gates to Las Colinas corporate entries to the 1970s ranch homes in North Irving. Most Irving calls get a same-day or next-day response depending on the nature of the repair.
- Valley Ranch
- Las Colinas
- North Irving
- University Hills
- Heritage District
Service Area - Cities Near Irving
Our Irving crews also cover the surrounding metro. If your gate is in Dallas, TX, Grand Prairie, TX, Coppell, TX, or Euless, TX, the same written-price, photo-documented standard applies. Call (817) 572-8590 from any of these cities and we’ll route the nearest technician.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Irving
For a gate stuck open or a failed operator, we usually arrive the same day. Irving traffic across the 114 and 635 corridors affects timing, but our crews are dispatched from the DFW area and a live person takes your call 24 hours a day. Call (817) 572-8590 for current availability.
Yes. Valley Ranch and many North Irving communities require HOA approval before visible gate work, and we’re familiar with the process. We can prepare the documentation your HOA needs, including material specs and the written scope of work. Estimates are free.
Yes, it’s the single biggest structural factor in Irving. Expansive Blackland Prairie clay swells in wet months and shrinks in dry ones, moving posts and footings by fractions of an inch that translate into gate misalignment. Our repairs account for that movement from the start. Call (817) 572-8590 if your gate is sagging or scraping.
If your Irving gate is sagging, stuck, or refusing to open, call (817) 572-8590. A live person answers, the price is written before work begins, and you get a photo record of everything we did before we leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.